| Module |
Input |
Output |
Description |
| Summary |
|
|
Module Summary Datasheet — Click for document. |
| Video |
|
|
Video Capabilities Overview — Click for document. |
| AM-111 * |
1 (+2) |
— |
Video: RS-170A NTSC & PAL with MPEG2 encoder, transport stream to 20Mbps, with 2 audio |
| AM-122 |
2 (+2) |
— |
Video: RS-170A NTSC & PAL with MPEG2/4 encoder, transport stream to 15Mbps, with 2 audio, incl. event mark tone generator |
| AM-132 |
2 (+2) |
— |
Video: RS-170A NTSC & PAL with MPEG2/4 encoder, transport stream to 15Mbps, with 2 audio, with video time code Insertion and event mark tone generator |
| AM-11x4 |
4 (+2) |
— |
Video: RS-170A NTSC & PAL matted “4 up” on a single 1440 pixel wide HD frame, with 2 audio (requires capable encoder module), incl. event mark tone generator, time code insertion |
| AM-12x1 |
1 (+2) |
— |
Video: HD SMPTE-292M (1080p, 1080i & 720p), with two audio (requires capable encoder module), incl. event mark tone generator, time code insertion |
| AY-12x1 |
1 (+2) |
2 |
Video: HD SMPTE-292M as AM-12x1 with loop-through HD and SD (down-converted) outputs |
| AM-13x1 |
1 (+2) |
— |
Video: HD RS-343 or RGB (Sync-on-Green), VGA & DVI (to 1280x1024 @ 60fps) with 2 audio (requires capable encoder), incl. tone generator for event marking, time code insertion |
| AM-15x1 |
1 (+2) |
— |
Video: HD VGA, DVI, "OpenLDI" and RS-343 (to 1600x1200@ 60fps) with 2 audio channels (requires capable encoder), incl. tone generator for event marking, time code insertion |
| AM-160x |
— |
— |
Motion JPEG-2000 encoder (1440x960, 1440x1152, 1080i, 1080p, 720p) with two channel audio encoder; requires a video input module (AM-11x4, AM-12x1, AM-13x1, AM-15x1) |
| AM-170x |
— |
— |
MPEG-4/H.264 (AVC) encoder (1440x960, 1440x1152, 1080i, 1080p, 720p); requires video input module (AM-11x4, AM-12x1, AM-13x1, AM-15x1). Future: two audio channels |
| AM-15F |
1 |
— |
Video: FC-AV (HSVN-9, ARINC 818) interface for F/A-18; triple-width module, requires AM-150 |
| AM-150 |
— |
— |
Video encoder: Motion JPEG-2000 (1024x1280 @ 20fps) with 2 channel audio; only for AM-15F |
| AM-156 |
6 |
— |
Audio: CVSD compression at 32Kbps rate |
| AM-204 |
4 |
— |
MIL-STD-1553B bus monitor (4 dual-redundant busses) |
| AM-213 † |
4 |
— |
MIL-STD-1553B bus monitor with message filtering (3 dual-redundant busses) |
| AM-228 |
8 |
— |
IRINC 429 bus monitor |
| AM-261 |
1 |
— |
IEEE1394B (Firewire) D/CAM (video) acquisition (400/800Mbps) |
| AM-273 |
3 |
— |
IntelliBus NIC; 3 buses at 15Mb/s per bus. Double-width module |
| AM-304 |
4 |
— |
PCM: NRZ-L data with clock (RS-422 levels), data rate to 20Mb/s. Throughput mode only |
| AM-334 |
4 |
— |
PCM: NRZ-L data with clock (RS-422 and TTL levels), data rate to 20Mb/s, throughput mode |
| AM-338 † |
8 |
— |
PCM, data rate to 20Mb/s |
| AM-344 † |
4 |
— |
PCM (with bit-sync capability), data rate to 20Mb/s, LED status indicators |
| AM-413 |
3/2/1 |
— |
Parallel input, programmable as 32bits x 1, or 16bits x 2, or 8bits x 3 |
| AM-430 |
32 |
— |
Discrete Inputs, ±25VDC levels, debounced |
| AM-432 |
32 |
— |
Discrete Inputs, TTL levels, high speed (no debouncing) |
| AM-454 |
4 |
— |
RS-232, RS-422/485 up to 1.47 million baud (1.5 million baud option available) |
| AM-458 † |
8 |
— |
RS-232, RS-422/485 up to 1.47 million baud |
| AM-504 |
4 |
— |
Analog: 16-bit resolution (programmable gain/offset) |
| AM-51b6 † |
16 |
— |
Analog: 16-bit resolution (programmable gain/offset). Requires AM-530a |
| AM-524 |
4 |
— |
Analog with ICP interface: 16-bit resolution (programmable gain/offset/resolution) |
| AM-530a † |
— |
— |
Digitizer and packetizer for AM-51b6 analog module. Requires AM-51b6 |
| AM-602 |
2 |
— |
High-speed, low overhead HOTLink II™ serial ports with 2 channels at 400Mbps per channel |
| AM-801 |
1 |
1 |
IEEE802.3 Gigabit Ethernet for output and input: raw frames (“sniffing”), UDP, and TCP streams |
| AD-11x4 |
— |
4 |
Video: RS-170A NTSC/PAL with two audio outputs |
| AY-12x1 |
1 |
1 |
Video: SMPTE-292M input with one down converted RS-170A output (H2 2009) |
| AO-381 † |
— |
1 |
PCM Output for telemetry downlink, rate to 20Mb/s with programmable source channel selection |
| mR-X01‡ |
— |
1 |
PCM Output for telemetry downlink, rate to 20Mb/s with programmable source channel selection |
| mR-X02‡ |
2 |
1 |
IRIG-B, IEEE1394 and discrete control/status as mR-X01, plus HAVE QUICK input |
| mR-ES1*‡ |
4 |
4 |
Ethernet switch with two 1000Base-T (Gigabit) ports and two 100Base-T ports |
| mR-ES2‡ |
5 |
5 |
Ethernet switch with four 1000Base-T (Gigabit) ports and one 100Base-T port |
